Cricut® Project Center



Haunted house


profile
Design by: babygirl02 (1 Project)
Project skill level: moderate
Project time: less than 30 minutes
Project tags: Halloween Celebration Celebration Layouts Invitations Holiday Layouts Holiday Cards Seasonal Layouts Seasonal Cards Cards

I made this card/ party invitation with the create a critter 2 cartridge

CRICUT ®: WHAT WAS USED

OTHER MATERIALS NEEDED

  • card stock
  • glue

Project Cut Files

STEP-BY-STEP How-TO INSTRUCTIONS

Haunted house card or invitation
Sizes of each piece
House back ground (yellow piece) - 7.139 width 10.51 height
Big ghost - 3.167 width 2.583 height
Mini ghost - 1 width 0.086 height
Treat bag (orange paper) – 1.542 width 1.375 height ( I cut this one twice one orange and one brown and I cut the handle off of the orange one and glue them together so I can get the orange face for inside the bag)
Treat bag (brown part, face) - 1.194 width 0.958 height
House (front of card) – 7.139 width 11.00 height
House front (brown with windows, cut out 2) – 7.208 width 9.319 height
Boo – 1.167 width 0.569 height

To create the pop up effect
1. Take a piece of paper fold in half and fold the ends in ( the ends that you fold in are the ones that you glue to the front of the inside on the card and the back of the card part that you open, Bend top back)
2. Glue your figurine to the paper, glue tabs to card and push the figurine down to the side people will see.


Then I glued the house together and, (I drew the bat and added it to make it look like a haunted house. The front of the card that people open I made a little bigger because you need to fold the bottom half of the card to help make the pop up effect.
Here are some pictures that I took of the finished product I hope you like it.
If you have any questions feel free to email me at babygirl2486@gmail.com

Step 1

Haunted house card or invitation
Sizes of each piece
House back ground (yellow piece) - 7.139 width 10.51 height
Big ghost - 3.167 width 2.583 height
Mini ghost - 1 width 0.086 height
Treat bag (orange paper) – 1.542 width 1.375 height ( I cut this one twice one orange and one brown and I cut the handle off of the orange one and glue them together so I can get the orange face for inside the bag)
Treat bag (brown part, face) - 1.194 width 0.958 height
House (front of card) – 7.139 width 11.00 height
House front (brown with windows, cut out 2) – 7.208 width 9.319 height
Boo – 1.167 width 0.569 height

To create the pop up effect
1. Take a piece of paper fold in half and fold the ends in ( the ends that you fold in are the ones that you glue to the front of the inside on the card and the back of the card part that you open, Bend top back)

Step 2

2. Glue your figurine to the paper, glue tabs to card and push the figurine down to the side people will see.


Then I glued the house together and, (I drew the bat and added it to make it look like a haunted house. The front of the card that people open I made a little bigger because you need to fold the bottom half of the card to help make the pop up effect.
Here are some pictures that I took of the finished product I hope you like it.

Step 3

If you have any questions feel free to email me at babygirl2486@gmail.com

Related Projects

COMMENTS

Add your comments